Advantages
♦ Outstanding viscosity-temperature performance
♦ Outstanding low temperature fluidity, ensuring normal operation of equipment in low temperature condition
♦ Outstanding thermal resistance stability, preventing oil from damage in high temperature condition
♦ Good extreme pressure and anti-wear performance, reducing wear of equipment
♦ Neither coke nor deposit after durative application in high temperature condition
♦ Increasing efficiency, reducing power consumption, lowering wear, prolonging service life and oil drain interval compared to mineral type gear oil, reducing repair costs and energy consumption
Performance
The product meets the following specifications:
♦ Q/SH303 171-2004
♦ Technical recognition by Tianjin LG-DAGU Chemical Industry Co., Ltd.
♦ Suitable for lubrication of various moderate/low speed moderate duty closed industrial gears, worm gears and sliding/rolling bearings in industries such as metallurgy, construction material, petroleum, petrochemical, chemical engineering, machining and so on
♦ Applied temperature range: -30ºC~150ºC for grade 46 and 460; -25ºC~150ºC for grade 680
Typical properties
|
Items
|
4405 synthetic moderate duty industrial gear oil (PAG based)
|
|
Grade
|
46
|
68
|
150
|
220
|
460
|
680
|
|
Appearance
|
Transparent liquid of yellow to red brown
|
|
Kinematic viscosity (40ºC), mm2/s
|
46.2
|
68.7
|
152.6
|
221.3
|
467.2
|
686.5
|
|
Viscosity index
|
174
|
175
|
190
|
204
|
220
|
235
|
|
Flash point (COC), ºC
|
240
|
242
|
248
|
252
|
264
|
269
|
|
Pour point, ºC, not higher than
|
-48
|
-48
|
-47
|
-42
|
-39
|
-39
|
|
Copper corrosion (100ºC, 3h), level
|
1b
|
Precautions
♦ Use seals made of NBR within 100ºC and those of FKM or silicon rubber when temperature lasts high
♦ Use epoxy resin or MPFR coating if industrial paint is not acceptable. Use oil level of glass or PA material
